Published On Apr 4, 2022
[email protected]
In this video we discuss parts needed or at least the parts we used to LS swap of the 70 Chevelle
Start a ls based engine
This one is a fully rebuilt 5.3 STOCK
Oil pan
I forgot to add the oil pan one of my viewers reminded me
https://www.summitracing.com/parts/su...
Motor mount and trans mount are stock SBC TH350 mounts
https://www.summitracing.com/parts/su...
Ls Motor mount adapter plates LIKE THESE not sure witch brand we used was a wile back
https://www.ebay.com/itm/284562960978...
Trans ceossmember ls swap with 4l60e
https://www.summitracing.com/parts/su...
Driveshaft
On this car we did not have a driveshaft when we started so we got one out of a later model van and had to have it Shortened but If you have a drive shaft and for Instance your car has a th350 if will need to be shortened around 4in if despond to a 700r4 or 4l60e if I rember correctly you will need to Measure this to be sure
Headers 1 7/8 Ls swap headers
https://speed-engineering.com/collect...
EFI fuel system
This is like the kit we bought but it is not the same one I can’t find the part number for kit I install
https://www.jegs.com/i/Holley/510/19-...
Fuel filter regulator
https://www.summitracing.com/parts/su...
Returnless fuel rail
is a 2004 or newer Silverado Tahoe GMC Yukon etc.
Ls swap wiring harness
https://www.ebay.com/itm/203211186595...
Radiator
https://www.ebay.com/itm/174463782891...
Radiator Hoses
Upper
Gates 24409
Will not work with truck water pump this car is running a f body water pump from 98-02 camaro or firebird ls1
It come with a plastic Quick disconnect on one end cut it off and who’s fits perfectly
Lower
Continental D71244
It must bit cut to fit as well I installed on radiator and then cut to fit on thermostat housing
Heater loop
Dayco 87653
This hose comes shaped as a J cut it to a U and install
Power steering
Stock power steering lines
Metric to standard power steering fitting
https://www.amazon.com/dp/B08SR39Q7C/...