Want to spruce up some copper or brass components? Or perhaps you want to re-finish a worn out block? This is the tutorial for you.

For quick reference:

To make the electrolyte - I used 32V at 3A, will work at lower but will take longer
For acid pickle - I used 5mol HCl which I diluted to roughly 0.2-0.5mol with water for 5 minutes
For Plating - I used 4.5V for this part with a distance between it and the anode of about 10cm
For Plating - Connect POSITIVE to ANODE and connect NEGATIVE/GROUND to PART

Timestamps:
00:33 - Intro
02:30 - Materials
06:30 - Making the Electrolyte
12:50 - Cleaning
14:56 - Acid Pickle
16:54 - Plating Intro
18:33 - Plating Method
23:30 - Final Thoughts
____

Materials used in this guide:

Nickel Anodes (thin): https://amzn.to/2WuPzsx
Glass Beakers: https://amzn.to/2CejAG9
White Vinegar: https://amzn.to/2Wuhetv
Power Supply: https://amzn.to/30s1it4
Copper Wire: https://amzn.to/3jcVM5W
Funnels: https://amzn.to/3h80VdI
Filtre Paper: https://amzn.to/30pqHUd
Ultrasonic Cleaner: https://amzn.to/3eBS0zp
Cleaning Fluid: https://amzn.to/2Cm36vv
Magnetic Stirer: https://amzn.to/3jhfSfe

HCl Acid from: https://apcpure.com/
Source locally and responsibly.

____

Link to our webshop:
https://store.bit-tech.net/

____

Don't forget to follow us over at:

Website - https://www.bit-tech.net/
Instagram -   / bit_tech  
Discord -   / discord  
Facebook -   / bittech  
Twitter -   / bittech  
Builds.gg - https://builds.gg/bittech